STRONG Software SRT8201_V1.3.9 -15.04.2015
STRONG Software SRT8201_V1.3.9_15.04.2015
STRONG Software_SRT8201_V1.3.9 OK 15.04.2015

Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:

1) Firmware: SRT_8201_v1.3.9_20150324.abs

2) Release notes

3) Update Instruction:

a) At the PC:

Extract the .abs file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.

b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:

1. Press MENU button to enter Main Menu. Select Tools with the "up/down" buttons and press OK to enter.

2. After entering Tools menu use the "up/down" buttons and select Upgrade by USB and press OK. Software Upgrade menu is shown.

3. Use the "</>" buttons to select AllCode item and the "up/down" buttons to select the Upgrade File. With the "</>" buttons select the correct update file. Now use the "up/down" buttons to select Startand press OK to start the update process.

4. After the software file is loaded you will be asked if you want to burn flash. Select Yes to update your receiver or No to cancel. Then press OK to perform the desired action.Release notesSoftware version 1.3.9 from 24.03.2015:

Following improvements were realised since the previous software version:

• In Italian videotext subpages issue is solved
AttentionNEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically within the „First time installation“!
With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!

**Hidden Content: Reply to see the content**